About the author
Contact the author
Categories
MANAGEMENT INFORMATION SYSTEM
FACILITY MANAGEMENT
FACILITY MANAGEMENT
INTERNATIONAL ECONOMICS
Latest notes
INTERNATIONAL ECONOMICS
[August 3, 2010]

FACILITY MANAGEMENT
[August 3, 2010]

M.I.S.
[August 3, 2010]

Welcome Message
[August 1, 2010]

Photo albums







03/08 04:18AM
INTERNATIONAL ECONOMICS
 

International economics is concerned with the effects upon economic activity of international differences in productive resources and consumer preferences and the institutions that affect them. It seeks to explain the patterns and consequences of transactions and interactions between the inhabitants of different countries, including trade, investment and migration.


International trade

Scope and methodology

The economic theory of international trade differs from the remainder of economic theory mainly because of the comparatively limited international mobility of the capital and labour [8]. In that respect, it would appear to differ in degree rather than in principle from the trade between remote regions in one country. Thus the methodology of international trade economics differs little from that of the remainder of economics. However, the direction of academic research on the subject has been influenced by the fact that governments have often sought to impose restrictions upon international trade, and the motive for the development of trade theory has often been a wish to determine the consequences of such restrictions.

The branch of trade theory which is conventionally categorized as "classical" consists mainly of the application of deductive logic, originating with Ricardo’s Theory of Comparative Advantage and developing into a range of theorems that depend for their practical value upon the realism of their postulates. "Modern" trade theory, on the other hand, depends mainly upon empirical analysis.

Classical theory

The law of comparative advantage provides a logical explanation of international trade as the rational consequence of the comparative advantages that arise from inter-regional differences - regardless of how those differences arise. Since its exposition by John Stuart Mill [9] the techniques of neo-classical economics have been applied to it to model the patterns of trade that would result from various postulated sources of comparative advantage. However, extremely restrictive (and often unrealistic) assumptions have had to be adopted in order to make the problem amenable to theoretical analysis. The best-known of the resulting models, the Heckscher-Ohlin theorem (H-O) [10] depends upon the assumptions of no international differences of technology, productivity, or consumer preferences; no obstacles to pure competition or free trade and no scale economies. On those assumptions, it derives a model of the trade patterns that would arise solely from international differences in the relative abundance of labour and capital (referred to as factor endowments). The resulting theorem states that, on those assumptions, a country with a relative abundance of capital would export capital-intensive products and import labour-intensive products. The theorem proved to be of very limited predictive value, as was demonstrated by what came to be known as the "Leontief Paradox" (the discovery that, despite its capital-rich factor endowment, America was exporting labour-intensive products and importing capital-intensive products [11]) Nevertheless the theoretical techniques (and many of the assumptions) used in deriving the H-O model were subsequently used to derive further theorems. The Stolper-Samuelson theorem [12][13] , which is often described as a corollary of the H-O theorem, was an early example. In its most general form it states that if the price of a good rises (falls) then the price of the factor used intensively in that industry will also rise (fall) while the price of the other factor will fall (rise). In the international trade context for which it was devised it means that trade lowers the real wage of the scarce factor of production, and protection from trade raises it. Another corollary of the H-O theorem is Samuelson's factor price equalisation theorem [14] which states that as trade between countries tends to equalise their product prices, it tends also to equalise the prices paid to their factors of production. Those theories have sometimes been taken to mean that trade between an industrialised country and a developing country would lower the wages of the unskilled in the industrialised country. (But, as noted below, that conclusion depends upon the unlikely assumption that productivity is the same in the two countries). Large numbers of learned papers have been produced in attempts to elaborate on the H-O and Stolper-Samuelson theorems, and while many of them are considered to provide valuable insights, they have seldom proved to be directly applicable to the task of explaining trade patterns.

(See also the Rybczynski theorem [15] [16])

Modern theory

Modern trade theory moves away from the restrictive assumptions of the H-O theorem and explores the effects upon trade of a range of factors, including technology and scale economies. It makes extensive use of econometrics to identify from the available statistics, the contribution of particular factors among the many different factors that affect trade. The contribution of differences of technology have been evaluated in several such studies. The temporary advantage arising from a country’s development of a new technology is seen as contributory factor in one study [17]. Other researchers have found research and development expenditure, patents issued, and the availability of skilled labor, to be indicators of the technological leadership that enables some countries to produce a flow of such technological innovations [18][19] and have found that technology leaders tend to export hi-tech products to others and receive imports of more standard products from them. Another econometric study also established a correlation between country size and the share of exports made up of goods in the production of which there are scale economies [20]. It is further suggested in that study that internationally-traded goods fall into three categories, each with a different type of comparative advantage:

  • goods that are produced by the extraction and routine processing of available natural resources – such as coal, oil and wheat, for which developing countries often have an advantage compared with other types of production – which might be referred to as "Ricardo goods";
  • low-technology goods, such as textiles and steel, that tend to migrate to countries with appropriate factor endowments - which might be referred to as "Heckscher-Ohlin goods"; and,
  • high-technology goods and high scale-economy goods, such as computers and aeroplanes, for which the comparative advantage arises from the availability of R&D resources and specific skills and the proximity to large sophisticated markets.

 The effects of trade

 Gains from trade

There is a strong presumption that any exchange that is freely undertaken will benefit both parties, but that does not exclude the possibility that it may be harmful to others. However (on assumptions that included constant returns and competitive conditions) Paul Samuelson has proved that it will always be possible for the gainers from international trade to compensate the losers [21]. Moreover, in that proof, Samuelson did not take account of the gains to others resulting from wider consumer choice, from the international specialisation of productive activities - and consequent economies of scale, and from the transmission of the benefits of technological innovation. An OECD study has suggested that there are further dynamic gains resulting from better resource allocation, deepening specialisation, increasing returns to R&D, and technology spillover. The authors found the evidence concerning growth rates to be mixed, but that there is strong evidence that a 1 per cent increase in openness to trade increases the level of GDP per capita by between 0.9 per cent and 2.0 per cent [22]. They suggested that much of the gain arises from the growth of the most productive firms at the expense of the less productive. Those findings and others [23] have contributed to a broad consensus among economists that trade confers very substantial net benefits, and that government restrictions upon trade are generally damaging. Factor price equalisation

Nevertheless there have been widespread misgivings about the effects of international trade upon wage earners in developed countries. Samuelson‘s factor price equalisation theorem indicates that, if productivity were the same in both countries, the effect of trade would be to bring about equality in wage rates. As noted above, that theorem is sometimes taken to mean that trade between an industrialised country and a developing country would lower the wages of the unskilled in the industrialised country. However, it is unreasonable to assume that productivity would be the same in a low-wage developing country as in a high-wage developed country. A 1999 study has found international differences in wage rates to be approximately matched by corresponding differences in productivity [24] . (Such discrepancies that remained were probably the result of over-valuation or under-valuation of exchange rates, or of inflexibilities in labour markets.) It has been argued that, although there may sometimes be short-term pressures on wage rates in the developed countries, competition between employers in developing countries can be expected eventually to bring wages into line with their employees' marginal products. Any remaining international wage differences would then be the result of productivity differences, so that there would be no difference between unit labour costs in developing and developed countries, and no downward pressure on wages in the developed countries[25].

Terms of trade

There has also been concern that international trade could operate against the interests of developing countries. Influential studies published in 1950 by the Argentine economist Raul Prebisch [26] and the British economist Hans Singer [27] suggested that there is a tendency for the prices of agricultural products to fall relative to the prices of manufactured goods; turning the terms of trade against the developing countries and producing an unintended transfer of wealth from them to the developed countries. Their findings have been confirmed by a number of subsequent studies, although it has been suggested [28] that the effect may be due to quality bias in the index numbers used or to the possession of market power by manufacturers . The Prebisch/Singer findings remain controversial, but they were used at the time - and have been used subsequently - to suggest that the developing countries should erect barriers against manufactured imports in order to nurture their own “infant industries” and so reduce their need to export agricultural products. The arguments for and against such a policy are similar to those concerning the protection of infant industries in general.

Infant industries

The term "infant industry" is used to denote a new industry which has prospects of becoming profitable in the long-term, but which would be unable to survive in the face of competition from imported goods. That is a situation that can occur because time is needed either to achieve potential economies of scale, or to acquire potential learning curve economies. Successful identification of such a situation followed by the temporary imposition of a barrier against imports can, in principle, produce substantial benefits to the country that applies it – a policy known as “import substitution industrialization”. Whether such policies succeed depends upon governments’ skills in picking winners, and there might reasonably be expected to be both successes and failures. It has been claimed that South Korea’s automobile industry owes its existence to initial protection against imports [29], but a study of infant industry protection in Turkey reveals the absence of any association between productivity gains and degree of protection, such as might be expected of a successful import substitution policy. [30] . Another study provides descriptive evidence suggesting that attempts at import substitution industrialisation since the 1970s have usually failed [31], but the empirical evidence on the question has been contradictory and inconclusive [32]. It has been argued that the case against import substitution industrialisation is not that it is bound to fail, but that subsidies and tax incentives do the job better [33]. It has also been pointed out that, in any case, trade restrictions could not be expected to correct the domestic market imperfections that often hamper the development of infant industries [34]

Trade policies

Economists’ findings about the benefits of trade have often been rejected by government policy-makers, who have frequently sought to protect domestic industries against foreign competition by erecting barriers, such as tariffs and quotas, against imports. Average tariff levels of around 15 per cent in the late 19th century rose to about 30 percent in the 1930s, following the passage in the United States of the Smoot-Hawley Act [35]. Mainly as the result of international agreements under the auspices of the General Agreement on Tariffs and Trade (GATT) and subsequently the World Trade Organisation (WTO), average tariff levels were progressively reduced to about 7 per cent during the second half of the 20th century, and some other trade restrictions were also removed. The restrictions that remain are nevertheless of major economic importance: among other estimates [36] the World Bank estimated in 2004 that the removal of all trade restrictions would yield benefits of over $500 billion a year by 2015 [37]. The largest of the remaining trade-distorting policies are those concerning agriculture. In the OECD countries government payments account for 30 per cent of farmers’ receipts and tariffs of over 100 per cent are common [38]. OECD economists estimate that cutting all agricultural tariffs and subsidies by 50% would set off a chain reaction in realignments of production and consumption patterns that would add an extra $26 billion to annual world income [39].

Quotas prompt foreign suppliers to raise their prices toward the domestic level of the importing country. That relieves some of the competitive pressure on domestic suppliers, and both they and the foreign suppliers gain at the expense of a loss to consumers, and to the domestic economy, in addition to which there is a deadweight loss to the world economy. When quotas were banned under the rules of the General Agreement on Tariffs and Trade (GATT), the United States, Britain and the European Union made use of equivalent arrangements known as voluntary restraint agreements (VRAs) or voluntary export restraints (VERs) which were negotiated with the governments of exporting countries (mainly Japan) - until they too were banned. Tariffs have been considered to be less harmful than quotas, although it can be shown that their welfare effects differ only when there are significant upward or downward trends in imports [40]. Governments also impose a wide range of non-tariff barriers [41] that are similar in effect to quotas, some of which are subject to WTO agreements [42]. A recent example has been the application of the precautionary principle to exclude innovatory products [43].

International finance

Scope and methodology

The economics of international finance do not differ in principle from the economics of international trade but there are significant differences of emphasis. The practice of international finance tends to involve greater uncertainties and risks because the assets that are traded are claims to flows of returns that often extend many years into the future. Markets in financial assets tend to be more volatile than markets in goods and services because decisions are more often revised and more rapidly put into effect. There is the share presumption that a transaction that is freely undertaken will benefit both parties, but there is a much greater danger that it will be harmful to others. For example, mismanagement of mortgage lending in the United States led in 2008 to banking failures and credit shortages in other developed countries, and sudden reversals of international flows of capital have often led to damaging financial crises in developing countries. And, because of the incidence of rapid change, the methodology of comparative statics has fewer applications than in the theory of international trade, and empirical analysis is more widely employed. Also, the consensus among economists concerning its principal issues is narrower and more open to controversy than is the consensus about international trade. Given by Mahendra

Exchange rates and capital mobility

A major change in the organisation of international finance occurred in the latter years of the twentieth century, and economists are still debating its implications. At the end of the second world war the national signatories to the Bretton Woods Agreement had agreed to maintain their currencies each at a fixed exchange rate with the United States dollar, and the United States government had undertaken to buy gold on demand at a fixed rate of $35 per ounce. In support of those commitments, most signatory nations had maintained strict control over their nationals’ use of foreign exchange and upon their dealings in international financial assets. But in 1971 the United States government announced that it was suspending the convertibility of the dollar, and there followed a progressive transition to the current regime of floating exchange rates in which most governments no longer attempt to control their exchange rates or to impose controls upon access to foreign currencies or upon access to international financial markets. The behaviour of the international financial system was transformed. Exchange rates became very volatile and there was an extended series of damaging financial crises. One study estimated that by the end of the twentieth century there had been 112 banking crises in 93 countries [44], another that there had been 26 banking crises, 86 currency crises and 27 mixed banking and currency crises [45] - many times more than in the previous post-war years.

The outcome was not what had been expected. In making an influential case for flexible exchange rates in the 1950s, Milton Friedman had claimed that if there were any resulting instability, it would mainly be the consequence of macroeconomic instability [46], but an empirical analysis in 1999 found no apparent connection [47]. Economists began to wonder whether the expected advantages of freeing financial markets from government intervention were in fact being realised [48][49][50]. Neoclassical theory had led them to expect capital to flow from the capital-rich developed economies to the capital-poor developing countries - because the returns to capital there would be higher. Flows of financial capital would tend to increase the level of investment in the developing countries by reducing their costs of capital, and the direct investment of physical capital would tend to promote specialisation and the transfer of skills and technology. However, theoretical considerations alone cannot determine the balance between those benefits and the costs of volatility, and the question has had to be tackled by empirical analysis. A 2006 International Monetary Fund working paper offers a summary of the empirical evidence [51]. The authors found little evidence either of the benefits of the liberalisation of capital movements, or of claims that it is responsible for the spate of financial crises. They suggest that net benefits can be achieved by countries that are able to meet threshold conditions of financial competence but that for others, the benefits are likely to be delayed, and vulnerability to interruptions of capital flows is likely to be increased.

Policies and institutions

Although the majority of developed countries now have "floating" exchange rates, some of them – together with many developing countries – maintain exchange rates that are nominally "fixed", usually with the US dollar or the euro. The adoption of a fixed rate requires intervention in the foreign exchange market by the country’s central bank, and is usually accompanied by a degree of control over its citizens’ access to international markets. A controversial case in point is the policy of the Chinese government who had, until 2005, maintained the renminbi at a fixed rate to the dollar, but have since "pegged" it to a basket of currencies. It is frequently alleged that in doing so they are deliberately holding its value lower than if it were allowed to float (but there is evidence to the contrary [52]). Some governments have abandoned their national currencies in favour of the common currency of a currency area such as the "eurozone" and some, such as Denmark, have retained their national currencies but have pegged them at a fixed rate to an adjacent common currency. On an international scale, the economic policies promoted by the International Monetary Fund (IMF) have had a major influence, especially upon the developing countries. The IMF was set up in 1944 to encourage international cooperation on monetary matters, to stabilise exchange rates and create an international payments system. Its principal activity is the payment of loans to help member countries to overcome balance of payments problems, mainly by restoring their depleted currency reserves. Their loans are, however, conditional upon the introduction of economic measures by recipient governments that are considered by the Fund's economists to provide conditions favourable to recovery. Their recommended economic policies are broadly those that have been adopted in the United States and the other major developed countries (known as the "Washington Consensus") and have often included the removal of all restrictions upon incoming investment. The Fund has been severely criticised by Joseph Stiglitz and others for what they consider to be the inappropriate enforcement of those policies and for failing to warn recipient countries of the dangers that can arise from the volatility of capital movements.

International financial stability

From the time of the Great Depression onwards, regulators and their economic advisors have been aware that economic and financial crises can spread rapidly from country to country, and that financial crises can have serious economic consequences. For many decades, that awareness led governments to impose strict controls over the activities and conduct of banks and other credit agencies, but in the 1980s many governments pursued a policy of deregulation in the belief that the resulting efficiency gains would outweigh any systemic risks. The extensive financial innovations that followed are described in the article on financial economics. One of their effects has been greatly to increase the international inter-connectedness of the financial markets and to create an international financial system with the characteristics known in control theory as "complex-interactive". The stability of such a system is difficult to analyse because there are many possible failure sequences. The internationally-systemic crises that followed included the equity crash of October 1987 [53], the Japanese asset price collapse of the 1990s [54] the Asian financial crisis of 1997[55] the Russian government default of 1998 [56](which brought down the Long-Term Capital Management hedge fund) and the 2007-8 sub-prime mortgages crisis [57][58]. The symptoms have generally included collapses in asset prices, increases in risk premiums, and general reductions in liquidity. Measures designed to reduce the vulnerability of the international financial system have been put forward by several international institutions. The Bank for International Settlements made two successive recommendations (Basel I and Basel II [59]) concerning the regulation of banks, and a coordinating group of regulating authorities, and the Financial Stability Forum, that was set up in 1999 to identify and address the weaknesses in the system, has put forward some proposals in an interim report [60].

Migration

Elementary considerations lead to a presumption that international migration results in a net gain in economic welfare. Wage differences between developed and developing countries have been found to be mainly due to productivity differences [24] which may be assumed to arise mostly from differences in the availability of physical, social and human capital. And economic theory indicates that the move of a skilled worker from a place where the returns to skill are relatively low to a place where they are relatively high should produce a net gain (but that it would tend to depress the wages of skilled workers in the recipient country). There have been many econometric studies intended to quantify those gains. A Copenhagen Consensus study suggests that if the share of foreign workers grew to 3% of the labour force in the rich countries there would be global benefits of $675 billion a year by 2025 [61]. However, a survey of the evidence led a House of Lords committee to conclude that any benefits of immigration to the United Kingdom are relatively small [62]. Evidence from the United States also suggests that the economic benefits to the receiving country are relatively small [63], and that the presence of immigrants in its labour market results in only a small reduction in local wages [64]. From the standpoint of a developing country, the emigration of skilled workers represents a loss of human capital (known as brain drain), leaving the remaining workforce without the benefit of their support. That effect upon the welfare of the parent country is to some extent offset by the remittances that are sent home by the emigrants, and by the enhanced technical know-how with which some of them return. One study introduces a further offsetting factor to suggest that the opportunity to migrate fosters enrolment in education thus promoting a "brain gain" that can counteract the lost human capital associated with emigration [65]. Whereas some studies suggest that parent countries can benefit from the emigration of skilled workers [66], generally it is emigration of unskilled and semi-skilled workers that is of economic benefit to countries of origin, by reducing pressure for employment creation. Where skilled emigration is concentrated in specific highly skilled sectors, such as medicine, the consequences are severe and even catastrophic in cases where 50% or so of trained doctors have emigrated. The crucial issues, as recently acknowledged by the OECD, is the matter of return and reinvestment in their countries of origin by the migrants themselves: thus, government policies in Europe are increasingly focused upon facilitating temporary skilled migration alongside migrant remittances. Unlike movement of capital and goods, since 1973 government policies have tried to restrict migration flows, often without any economic rationale. Such restrictions have had diversionary effects, channeling the great majority of migration flows into illegal migration and "false" asylum-seeking [67]. Since such migrants work for lower wages and often zero social insurance costs, the gain from labour migration flows is actually higher than the minimal gains calculated for legal flows; accompanying side-effects are significant, however, and include political damage to the idea of immigration, lower unskilled wages for the host population, and increased policing costs alongside lower tax receipts.

Globalisation

The term globalisation has acquired a variety of meanings, but in economic terms if refers to the move that is taking place in the direction of complete mobility of capital and labour and their products, so that the world's economies are on the way to becoming totally integrated. The driving forces of the process are reductions in politically-imposed barriers and in the costs of transport and communication (although, even if those barriers and costs were eliminated, the process would be limited by inter-country differences in social capital). It is a process which has ancient origins, which has gathered pace in the last fifty years, but which is very far from complete. In its concluding stages, interest rates, wage rates and corporate and income tax rates would become the same everywhere, driven to equality by competition, as investors, wage earners and corporate and personal taxpayers threatened to migrate in search of better terms. In fact, there are few signs of international convergence of interest rates, wage rates or tax rates. Although the world is more integrated in some respects, it is possible to argue that on the whole it is now less integrated than it was before the first world war.[68], and that many middle-east countries are less globalised than they were 25 years ago [69].

Of the moves toward integration that have occurred, the strongest has been in financial markets, in which globalisation is estimated to have tripled since the mid-1970s[70]. Recent research has shown that it has improved risk-sharing, but only in developed countries, and that in the developing countries it has increased macroeconomic volatility. It is estimated to have resulted in net welfare gains worldwide, but with losers as well as gainers. [71][72]. Increased globalisation has also made it easier for recessions to spread from country to country. A reduction in economic activity in one country can lead to a reduction in activity in its trading partners as a result of its consequent reduction in demand for their exports, which is one of the mechanisms by which the business cycle is transmitted from country to country. Empirical research confirms that the greater the trade linkage between countries the more coordinated are their business cycles [73]. Globalisation can also have a significant influence upon the conduct of macroeconomic policy. The Mundell-Fleming model and its extensions [74] are often used to analyse the role of capital mobility (and it was also used by Paul Krugman to give a simple account of the Asian financial crisis [75]). Part of the increase in income inequality that has taken place within countries is attributable - in some cases - to globalisation. A recent IMF report demonstrates that the increase in inequality in the developing countries in the period 1981 to 2004 was due entirely to technological change, with globalisation making a partially offsetting negative contribution, and that in the developed countries globalisation and technological change were equally responsible.[76].

Opposition

Globalisation is seen as contributing to economic welfare by most economists – but not all. Professor Joseph Stiglitz [77][78] of the Columbia Business School has advanced the infant industry case for protection in developing countries and criticised the conditions imposed for help by the International Monetary Fund [79]. And Professor Dani Rodrik of Harvard[80] has noted that the benefits of globalisation are unevenly spread, and that it has led to income inequalities, and to damaging losses of social capital in the parent countries and to social stresses resulting from immigration in the receiving countries [81]. An extensive critical analysis of these contentions has been made by Martin Wolf [82], and a lecture by Professor Jagdish Bhagwati has surveyed the debate that has taken place among economists[83]


03/08 04:14AM
FACILITY MANAGEMENT

Facilities Management

Sections of This Topic Include:

Introductory and General
Specific Facilities (signage, computers, etc.)
Setting Up an Office
Telecommuting (working from home)
Inventory Management (this section is in "Operations Management)
Logistics and Transportation Management (this section is in "Operations Management")


Introductory and General

Designing An Effective Home Office
Designing Your Home Office
What is Asset Management?
What is Construction Management?
Introduction to Property Management

Specific Facilities

Building

Facilities Location (rather detailed, but stimulates thought about considerations)
Facilities Planning (for education; includes generally applicable guidelines)
Facilities Layout

HVAC Systems

Retrofit HVAC Systems Without Disrupting Occupants
HVAC (Definition)
Types of HVAC Systems

Offices

See Setting Up an Office below.

Computers

Computer and Network Security
The Use of Computers in Facilities/Installations Planning
Computer Aided Facilities Management

Setting Up An Office

(This section is about setting up office facilities. Information about organizing yourself, your files, paperwork, etc., is included in the topic Organizing Yourself.)
Office Equipment overview
Office Design, Leasing and Organizing
Organizing Yourself (organizing your office and activities, once the office is set up)
Time Management

Telecommuting

Basics

Entrepreneur's HomeOfficeMag
Telecommuting Basics for Front Line Staff
The Virtual Workplace -- A Mobile MultiMedia Architecture
Telecommuting Checklist and Agreement

General Resources About Telecommuting

Telecommuting Defined
resources about telecommuting
International Homeworkers Association
Telecommuting Resource Center
List of sites and articles about telecommuting

General Resources About Facilities Management

Construction Industry Directory of Architects, Engineers, Building Suppliers, (many!!!)
International Facilities Management Association
Facilities Management News


Submit a link

For the Category of Facilities Management:

Related Library Topics

Recommended Books

The following books are recommended because of their highly practical nature and often because they include a wide range of information about this Library topic. To get more information about each book, just hover your cursor over the image of the book. A "bubble" of information will be displayed. You can click on the title of the book in that bubble to get more information, too.

Facility management is an interdisciplinary field primarily devoted to the maintenance and care of commercial or institutional buildings, such as hospitals, clinics, hotels, resorts, schools, office complexes, sports arenas or convention centers. Duties may include the care of air conditioning, electric power, plumbing and lighting systems; cleaning; decoration; groundskeeping and security. Some or all of these duties can be assisted by computer programs. These duties can be thought of as non-core or support services, because they are not the primary business (taken in the broadest sense of the word) of the owner organization.

It is the role of the facility management function (whether it is a separate department or small team) to coordinate and oversee the safe, secure, and environmentally-sound operations and maintenance of these assets in a cost effective manner aimed at long-term preservation of the asset value, and also other janitorial duties such as making sure the environment is properly cleaned and sanitized for its tenants. In those cases where the operation of the facility directly involves the occupants and/or customers of the owner organization, the satisfactory delivery of facility-related services to these people will be an important consideration too; hence, the term "end-user satisfaction" is often used both as a goal and a measure of performance.

The term facility management is similar to property management although not exactly the same. While both manage the day to day operations of a facility the property such as cleaning, maintenance and security, similar to Janitors, one must not confuse it with such a title. The property manager has an expanded role which includes leasing and marketing activities whereas the facility manager role focuses on existing tenants who usually are owner occupants. An important feature of facility management is that it takes account of human needs of its tenants in the use of buildings and other constructed facilities. These softer factors complement the harder factors associated with the maintenance and care of engineering services installations.

According to Atkin and Brooks[1], an important concept in the facility management field is that of outsourcing, where the owner enters into an arrangement with external organizations to provide one or more services in preference to their being provided through internal arrangements. The reasons for this action can vary, including lack of in-house resources, lack of expertise and pressure to reduce costs. Unfortunately, confusion can exist because of the close association that facility management has with outsourcing. The two concepts are not synonymous; rather, outsourcing is one means for providing facility-related services to the owner organization.

Facility management is performed during the operational phase of a building’s life cycle, which normally extends over many decades. As such, it will represent a continuous process of service provision to support the owner’s core business and one where improvement will be sought on a continuous basis. It is essential that decision-making in the preceding design and construction phases is therefore properly informed about operational requirements if the facility is to provide optimal support to the owner’s business. In this connection, facility management can be seen as an integral part of a coordinated and controlled process of design, engineering, construction and operations. Where a facility is provided on a turnkey basis, for example design-build-finance-operate (DBFO), the consortium responsible for the delivery of the physical asset and then operating the core service will need to understand implicitly the day-to-day demands in managing that facility. Under such arrangements – typically public-private partnerships (PPP) – owner-operators must fully integrate operational thinking into early design decision-making.

A major challenge facing facility owners is reducing demand for energy for economic reasons, but also because energy consumption goes hand-in-hand with carbon emissions. Reducing energy during the operational phase of a facility's life similarly reduces carbon emissions. When considering that 30-40% of a country's total carbon emissions is attributable to buildings and other constructed facilities, it is clear that operations and, hence, facility management have a significant role to play.

Contents

[hide]
//

Role

The discipline of facility management and the role of facility managers in particular are evolving to the extent that many managers have to operate at two levels: strategic-tactical and operational. In the former case, owners need to be informed about the potential impact of their decisions on the provision of space and services. In the latter, it is the role of a facility manager to ensure proper operation of all aspects of a building to create an optimal environment for the occupants to function. This is accomplished by managing some of the following activities.

Environmental Health and Safety

  • Waste Removal
  • OSHA (Occupational Health and Safety)Regulations (could be a different organization depending on type of building i.e. hospital)
  • HAZMAT (Hazardous Material) compliance
  • Building Cleanliness: This sub-discipline of facility management includes routine cleaning (restrooms, common areas) as well as more specific emphasis on dust control [2] and hygiene maintenance.[3]

Dust control is an increasing concern[4] and is crucial for providing a "safer and healthier environment for employees and customers."[5] Indeed, the National Institute for Allergy and Infectious Diseases notes that dust mites are a common cause of perennial allergic rhinitis, an affliction that affects roughly 60 million people in the United States.[6] The Textile Rental Services Association (TRSA) attributes 70% of dust inside the workplace to the outdoors. According to the TRSAA, floor mats placed inside building entrances capture up to 70% of dust debris. Specialty mops[7] are an integral component of addressing dust control.

Workplace cleanliness can be addressed by both employer and employee, though only in the former is the concept formally considered facility management. The latter concerns the introduction of hand sanitizers,[8] for instance, to reduce the spread of germs.

Mechanical Systems

  • HVAC/R (Heating, Ventilating, Air conditioning and Refrigeration)
    • Indoor Air Quality
    • Temperature Control
  • Preventative Maintenance (Scheduled maintenance to prevent break down)
  • Predictive Maintenance (Use of equipment or tests to predict when maintenance will be needed)
  • Elevator Maintenance

Power Systems

Building Systems

Life/Safety Systems

  • Sprinkler systems
  • Smoke/fire detection systems
  • Fire Extinguishers
    • Gaseous Extinguishers
    • FM-200
    • FE-25
    • Halon
  • Signage
  • Evacuation Plans

Space Management

  • Office Space Layout
  • Furniture Placement and Systems

Definitions

One definition provided by the International Facility Management Association (IFMA) is:

"A profession that encompasses multiple disciplines to ensure functionality of the built environment by integrating people, place, processes and technology."

Another broader definition provided by IFMA is: "The practice or coordinating the physical workplace with the people and work of the organization; integrates the principles of business administration, architecture, and the behavioral and engineering sciences."

In the UK and other European countries facilities management has a wider definition than simply the management of buildings and services. The definition of FM provided by the European Committee for Standardisation (CEN) and ratified by BSI British Standards is:

“Facilities management is the integration of processes within an organisation to maintain and develop the agreed services which support and improve the effectiveness of its primary activities”.

The British Institute of Facilities Management has formally adopted the CEN definition but also offers a slightly simpler description:

"Facilities management is the integration of multi-disciplinary activities within the built environment and the management of their impact upon people and the workplace".

In Australia, the term Commercial Services has replaced facilities management in some organisations. Commercial services can also define services other than just looking after facilities, such as security, parking, waste disposal, facility services and strategic planning.

A single or multiple buildings located on a single plot of land is referred to as a "Site". Multiple sites located in a single metropolitan area, but used by the same legal entity, are referred to as a "Campus." A Facility Management department may be responsible for a site; a campus; or, a regional area with multiple sites or campuses which may be a mix of owned and leased facilities. A Facility Management department will normally exist to manage the owner-occupied, physical assets of a company; whereas a Property Management department will normally exist to represent the only leased spaces. A Facility Management department is focused on cost effective, long-term utilization and value preservation of the owned assets while a Property Management department is typically focused on short-term lease returns.

Technology of building automation

Administrative vs. Technical Management

The support of administrative facility management through information technology is identified as Computer Aided Facility Management (CAFM), Facilities Management Systems, or Computerized Maintenance Management Systems.

The collection of monitoring and supervising devices, control and regulation systems, management- and optimisation facilities/mechanisms in buildings within technical facility management are identified as Building Automation (BA). The goal is to accomplish functional processes in the overall industry independently (automatically), according to pre-adjusted values (parameters) or to simplify their operation and monitoring. All sensors, actuators, control elements, users and other technical devices in the building are interconnected in a network. Workflows/sequences can be summarized in scenarios. Characteristic feature is the decentralized structure of control units (DDC) as well as the integrated networking via a bus system (usually EIB/KNX or illumination (DALI))

Movement to technical management has been rapid in some industries while other industries still rely on the antiquated administrative approach. Industries with more linear structures and processes typically are more inclined to implement technical systems because ongoing management of these systems can be maintained by a top down organizational structure. Industries that are not as linear have tended to be slow adopters of technical management because of the belief that the system cannot be implemented or maintained effectively. Industries like commercial office and retail often tend to have the most challenges in implementing and maintaining technical systems because their organizations reflect a great deal of diversity with owners, brokers, managers, and tenants typically being from different organizations with disparate interest and priorities. Recent trends have shown a dramatic increase in the use of technical management largely due to research demonstrating the tremendous cost savings of converting to the technical approach. In addition, technical management providers who are capable of matching the organization's processes, constituencies, and provide comprehensive setup and maintenance support throughout the life of the system have delivered significant advantages and reduce the number of early project terminations and under utilized or "orphaned" systems [1].

Components of best in class systems may include:

  • Certificate of Insurance [2]
  • Incident Tracking
  • Project Management
  • Preventive Maintenance
  • Automated & Mass Communications
  • Visitor Access
  • Security
  • Fire & Life Safety
  • Accounting

Orthography

In the United States both 'facility management' and 'facilities management' are widely used, while 'facilities management' is preferred in the UK, Canada, Australia and English-medium businesses in several European countries. In the US the 'facility management' departments of public or government origin are called '(State/County/City's Name) Department of Facilities Management', while if the 'facilities management' is part of private entity it might be called 'Facilities Management Department/Division of (ABC Corporation/Company/LLC/etc.)

See also


References

  1. Atkin, B. and Brooks, A. (2009) Total Facilities Management. 3rd edition, Wiley-Blackwell, Oxford and New York, 328pp.
  2. "In the Workplace, Controlling dust is a Must." http://www.u-need-it.com/supplies-blog/2010/02/23/in-the-workplace-controlling-dust-is-a-must/
  3. " Germ Squirm: Taking the Fear Out of Your Workplace." http://www.u-need-it.com/supplies-blog/2010/02/22/germ-squirm-taking-the-fear-out-of-your-workplace/
  4. "In the Workplace, Controlling dust is a Must." http://www.u-need-it.com/supplies-blog/2010/02/23/in-the-workplace-controlling-dust-is-a-must/
  5. "In the Workplace, Controlling dust is a Must." http://www.u-need-it.com/supplies-blog/2010/02/23/in-the-workplace-controlling-dust-is-a-must/
  6. "Airborne Allergens: Something in the Air." http://www3.niaid.nih.gov/topics/allergicDiseases/PDF/airborne_allergens.pdf
  7. http://www.u-need-it.com/c-97-dust-mops.aspx
  8. http://www.u-need-it.com/c-35-sanitizers.aspx

[edit] External links

 

 


03/08 04:09AM
M.I.S.
Definition: Management Information Systems (MIS) is the term given to the discipline focused on the integration of computer systems with the aims and objectives on an organisation.

The development and management of information technology tools assists executives and the general workforce in performing any tasks related to the processing of information. MIS and business systems are especially useful in the collation of business data and the production of reports to be used as tools for decision making.

Applications of MIS

With computers being as ubiquitous as they are today, there's hardly any large business that does not rely extensively on their IT systems.

However, there are several specific fields in which MIS has become invaluable.

* Strategy Support

While computers cannot create business strategies by themselves they can assist management in understanding the effects of their strategies, and help enable effective decision-making.

MIS systems can be used to transform data into information useful for decision making. Computers can provide financial statements and performance reports to assist in the planning, monitoring and implementation of strategy.

MIS systems provide a valuable function in that they can collate into coherent reports unmanageable volumes of data that would otherwise be broadly useless to decision makers. By studying these reports decision-makers can identify patterns and trends that would have remained unseen if the raw data were consulted manually.

MIS systems can also use these raw data to run simulations – hypothetical scenarios that answer a range of ‘what if’ questions regarding alterations in strategy. For instance, MIS systems can provide predictions about the effect on sales that an alteration in price would have on a product. These Decision Support Systems (DSS) enable more informed decision making within an enterprise than would be possible without MIS systems.

* Data Processing

MISNot only do MIS systems allow for the collation of vast amounts of business data, but they also provide a valuable time saving benefit to the workforce. Where in the past business information had to be manually processed for filing and analysis it can now be entered quickly and easily onto a computer by a data processor, allowing for faster decision making and quicker reflexes for the enterprise as a whole.

Management by Objectives

While MIS systems are extremely useful in generating statistical reports and data analysis they can also be of use as a Management by Objectives (MBO) tool.

MBO is a management process by which managers and subordinates agree upon a series of objectives for the subordinate to attempt to achieve within a set time frame. Objectives are set using the SMART ratio: that is, objectives should be Specific, Measurable, Agreed, Realistic and Time-Specific.

The aim of these objectives is to provide a set of key performance indicators by which an enterprise can judge the performance of an employee or project. The success of any MBO objective depends upon the continuous tracking of progress.

In tracking this performance it can be extremely useful to make use of an MIS system. Since all SMART objectives are by definition measurable they can be tracked through the generation of management reports to be analysed by decision-makers.

Benefits of MIS

The field of MIS can deliver a great many benefits to enterprises in every industry. Expert organisations such as the Institute of MIS along with peer reviewed journals such as MIS Quarterly continue to find and report new ways to use MIS to achieve business objectives.

Core Competencies

Every market leading enterprise will have at least one core competency – that is, a function they perform better than their competition. By building an exceptional management information system into the enterprise it is possible to push out ahead of the competition. MIS systems provide the tools necessary to gain a better understanding of the market as well as a better understanding of the enterprise itself.

Enhance Supply Chain Management

Improved reporting of business processes leads inevitably to a more streamlined production process. With better information on the production process comes the ability to improve the management of the supply chain, including everything from the sourcing of materials to the manufacturing and distribution of the finished product.

Quick Reflexes

As a corollary to improved supply chain management comes an improved ability to react to changes in the market. Better MIS systems enable an enterprise to react more quickly to their environment, enabling them to push out ahead of the competition and produce a better service and a larger piece of the pie.

Further information about MIS can be found at the Bentley College Journal of MIS and the US Treasury’s MIS handbook, and an example of an organisational MIS division can be found at the Department of Social Services for the state of Connecticut.

01/08 01:43AM
Welcome Message
We thank you for your choice to create your blog on on our site!

Please login to your personal administration space in order to add categories, notes, photo albums and to customize your blog.

You may choose between different blog layouts, manage their color and font settings, use templates for your blog and many others.

NEW! Dozens of backgrounds for your blog

A sponsored service of free-blog-site.com